ENGLISH

8

CONNECTIONS

 

 

 

 

Do not plug in the power cord until all connections have been

• Note that binding pin plug cords together with power cords or

 

completed.

placing them near a power transformer will result in generating

Be sure to connect the left and right channels properly (left with

hum or other noise.

 

left, right with right).

• Noise or humming may be generated if a connected audio

Insert the plugs securely. Incomplete connections will result in

equipment is used independently without turning the power

the generation of noise.

of this unit on. If this happens, turn on the power of the this

Use the AC OUTLET for audio equipment only. Do not use

unit.

 

it for hair driers, etc.

 

 

 

 

Connecting the audio components

Decoders with 6-channel analog outputs, etc.

AC CORD

AC 120V, 60Hz

LINE OUT

SUBWOOFER

CENTER

FRONT

 

SURROUND

L

 

 

 

R

 

 

 

R

 

 

 

L

 

 

 

 

R

 

 

R

L

R

L

Subwoofer jack

 

LINE IN

 

Connect the internal amplifier’s subwoofer to the subwoofer

 

 

 

 

 

terminal. (Refer to page 13.)

 

 

 

 

LINE OUT

 

 

 

 

 

 

 

Tape deck or CD recorder

 

 

 

Connecting the AC OUTLET

 

 

 

 

 

AC OUTLET

 

 

 

 

 

 

 

 

R

L

R

L

 

 

• SWITCHED

 

 

 

 

 

 

 

(total capacity – 120 W (1 A.))

R

L

R

L

 

 

The power to this outlet is turned on and off in conjunction with the

INPUT

OUTPUT

 

 

POWER switch on the main unit, and when the power is switched

 

 

 

 

 

 

Connecting a tape deck

 

 

between on and standby from the remote control unit.

Connections for recording:

 

 

No power is supplied from this outlet when this unit’s power is at

Connect the tape deck’s recording input jacks (LINE IN or

 

 

standby. Never connect equipment whose total capacity is above 120

REC) to this unit’s tape recording (OUT) jacks using pin plug

 

 

W (1 A.)

 

cords.

 

 

 

 

 

NOTE:

 

Connections for playback:

 

 

 

 

 

Only use the AC OUTLET for audio equipment. Never use it for hair

Connect the tape deck’s playback output jacks (LINE OUT or

 

 

 

 

driers, TVs or other electrical appliances.

PB) to this unit’s tape playback (IN) jacks using pin plug cords.

 

 

 

 

 

 

CD recorder, MD recorder or other component

 

 

CD player

 

equipped with digital output lacks.

OUTPUT

Connecting a CD player

 

 

 

OPTICAL

R

L

 

 

 

 

 

 

 

Connect the CD player’s analog

B

 

 

OUTPUT

 

 

 

 

 

 

 

R

L

 

output jacks (ANALOG OUTPUT) to

 

 

 

 

 

 

 

this unit’s CD jacks using pin plug

 

 

 

 

 

 

 

cords.

DIGITAL jacks

 

LINE OUT

 

 

Use these for connections to audio equipment with digital output. Refer

 

 

 

 

 

 

to Page 20 for instructions on setting this terminal.

 

 

 

 

Use 75 /ohms cable pin cords (sold separately) for coaxial connections.

Use optical cables (sold separately) for optical connections.

9

Page 9
Image 9
Denon AVR-1403, 483 Connections, Connecting the audio components, Use the AC Outlet for audio equipment only. Do not use