Denon 483, AVR-1403 Connecting the antenna terminals, English, AM loop antenna assembly, Notes

ENGLISH

Connecting the antenna terminals

	AM LOOP
	ANTENNA
	(An Accessory)
DIRECTION OF
BROADCASTING
STATION
FM ANTENNA
75 Ω /ohms
COAXIAL
CABLE
	AM OUTDOOR
	ANTENNA
FM INDOOR ANTENNA	GROUND
(An Accessory)

AM loop antenna assembly

		Connect to the AM
1	2	antenna terminals.
		3
	Remove the vinyl tie
	and take out the	Bend in the reverse
4	connection line.	direction.

a. With the antenna on top any stable surface.

Mount

b. With the antenna attached to a wall.

Installation hole

Mount on wall, etc.

Connection of AM antennas

1. Push the lever.	2. Insert the	3. Return the lever.
	conductor.

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

Notes:

•Do not connect two FM antennas simultaneously.

•Even if an external AM antenna is used, do not disconnect the AM loop antenna.

•Make sure AM loop antenna lead terminals do not touch metal parts of the panel.

12