ENGLISH
2 Dolby Digital and Dolby Pro Logic
Comparison of home surround systems | Dolby Digital | Dolby Pro Logic | |
|
|
| |
No. recorded channels (elements) | 5.1 ch | 2 ch | |
|
|
| |
No. playback channels | 5.1 ch | 4 ch | |
|
|
| |
Playback channels (max.) | L, R, C, SL, SR, SW | L, R, C, S (SW - recommended) | |
|
|
| |
Audio processing | Digital discrete processing Dolby Digital | Analog matrix processing Dolby Surround | |
|
|
| |
High frequency playback limit of surround | 20 kHz | 7 kHz | |
channel | |||
|
| ||
|
|
|
2Dolby Digital compatible media and playback methods
Marks indicating Dolby Digital compatibility: and .
The following are general examples. Also refer to the player’s operating instructions.
Media | Dolby Digital output jacks | Playback method (reference page) | |
|
|
| |
LD (VDP) | Coaxial Dolby Digital RF output jack | Set the input mode to “AUTO”. | |
1 | (Page 25) | ||
| |||
|
|
| |
| Optical or coaxial digital output | Set the input mode to “AUTO”. | |
DVD | (same as for PCM) | ||
(Page 25) | |||
| 2 | ||
|
| ||
|
|
| |
Others | Optical or coaxial digital output | Set the input mode to “AUTO”. | |
(satellite broadcasts, CATV, etc.) | (same as for PCM) | (Page 25) | |
|
|
|
1 Please use a commercially available adapter when connecting the Dolby Digital RF
Please refer to the instruction manual of the adapter when making connection.
2 Some DVD digital outputs have the function of switching the Dolby Digital signal output method between “bit stream” and “(convert to) PCM”. When playing in Dolby Digital surround on this unit, switch the DVD player’s output mode to “bit stream”. In some cases players are equipped with both “bit stream + PCM” and “PCM only” digital outputs. In this case connect the “bit stream + PCM” jacks to this unit.
(2)Dolby Pro Logic II
•Dolby Pro Logic II is a new
•Dolby Pro Logic II can be used to decode not only sources recorded in Dolby Surround ( ) but also regular stereo sources into five channels (front left, front right, center, surround left and surround right) to achieve surround sound.
•Whereas with conventional Dolby Pro Logic the surround channel playback frequency band was limited, Dolby Pro Logic II offers a wider band range (20 Hz to 20 kHz or greater). In addition, the surround channels were monaural (the surround left and right channels were the same) with previous Dolby Pro Logic, but Dolby Pro Logic II they are played as stereo signals.
•Various parameters can be set according to the type of source and the contents, so it is possible to achieve optimum decoding (see page 30).
Sources recorded in Dolby Surround
These are sources in which three or more channels of surround have been recorded as two channels of signals using Dolby Surround encoding technology.
Dolby Surround is used for the sound tracks of movies recorded on DVDs, LDs and video cassettes to be played on stereo VCRs, as well as for the stereo broadcast signals of FM radio, TV, satellite broadcasts and cable TV.
Decoding these signals with Dolby Pro Logic makes it possible to achieve
There are two types of DVD Dolby surround recording signals.
q
When either of these signals is input to the
2Sources recorded in Dolby Surround are indicated with the logo mark shown below.
Dolby Surround support mark:
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic” and the
44