Setting the speaker distance, Preparations | Denon AVR-1403, 483

Setting the speaker distance

Input the distances from the listening position to the speakers and set the surround delay time.

Preparations:

Measure the distances from the listening position to the speakers (L1 to L3 on the diagram at the right). L1: Distance from center speaker to listening position

L2: Distance from front speakers to listening position

L3: Distance from surround speaker to listening position

CAUTION:

Set the center speaker at the same distance from the front speakers (left and right) or the subwoofer, or so that the difference in distance (L2 – L1) is 5 feet or less.

Set the surround speakers (left and right) at the same distance from the front speakers (left and right) or the subwoofer, or so that the difference in distance (L2 – L3) is 15 feet or less.

ENGLISH

FL Center FR

L2	L1	Listening
		Listening
		position
		position
	L3

SLSR

1	Use the	(left) and	(right) buttons to set the distance from the front speakers and subwoofer to the
	listening position.

6 FRNT/SW 12ft

•The number changes in units of 1 foot each time one of the buttons is pressed. Select the value closest to the measured distance.

(“/SW” appears only when subwoofer = yes.)

Press the SELECT or (down) button to switch to the center speaker setting.

NOTE:

•The speaker distance can be adjusted between 0 and 60 feet in steps of 1 foot.

2	Use the	(left) and	(right) buttons to set the distance from the center speakers to the listening
2	position.

7 CENTER 12ft

•The number changes in units of 1 foot each time one of the buttons is pressed. Select the value closest to the measured distance.

Press the SELECT or (down) button to switch to the surround speaker setting.

NOTE:

•No setting when “None” has been selected for the center speaker.

3	Use the	(left) and	(right) buttons to set the distance from the surround speakers to the listening
3	position.

8 SURR. 10ft

•The number changes in units of 1 foot each time one of the buttons is pressed. Select the value closest to the measured distance.

Press the SELECT or (down) button to enter the setting and switch the DIGITAL input (COAX) setting.

NOTE:

•No setting when “None” has been selected for the surround speakers.

19

Image 19

Denon AVR-1403, 483 manual Setting the speaker distance, Preparations, Listening position

Contents

Nous vous remercions pour l’achat de cet appareil AVR-1403/483 English Francais Safety Instructions Before Using Table of Contents Features Front Panel Part Names and Functions System System SET UP Remote control unit Finally, setting up the system Setting UP the Speaker SystemsRead this First It for hair driers, etc Connecting the audio componentsConnections Use the AC Outlet for audio equipment only. Do not use Audio OUT Video OUT Connecting the video equipments Connecting a Video game equipment AM loop antenna assembly Connecting the antenna terminals Speaker system connections Connecting the speaker cordsSpeaker Impedance Protector circuit Range of operation of the remote control unit Using the Remote Control UnitInserting the batteries Use the following buttons to set up the system Setting UP the System SURR. Small System SET UPFront Large Center Small Setting the Subwoofer Mode SW Mode NormWoofer YES Preparations Setting the speaker distanceListening position Terminal Initial Digital input setupAfter setting up the system Coax DVD Preset memory Audio component Remote Control UnitOperating Denon audio components Preset memory Video component For video deck VCR Operating a video component stored in the preset memoryFor DVD player For video disc player VDP Before operating Check that all connections are proper Turn on the powerButton on the remote control unit to turn on the power Operation Playing the input source To select the input mode from main unitTo select the input mode from the remote control unit Input mode selection function DTS Adjusting the sound quality toneAfter starting playback Dolby Digital Turning the sound off temporarily muting Listening over headphonesChecking the currently playing program source, etc Mode AUTO, PCM, DTS or Analog button to switch to Playback using the external input EXT. in jacksFollow to 3 under Playing the input source Surround Adjust the level of the selected speakerBefore playing with the surround function Dolby PRO Logic Dolby Surround Pro Logic II mode Surround parameters q Pro Logic II Mode Dimension settingCenter Width setting Default setting Dolby PLII, Dolby PROLOGIC, Dolby DIGITAL, DTS Cinema EQ OFF COMP. Dynamic Range Compression DefaultCOMP. OFF Surround parameters w Cinema EQ. Cinema Equalizer Personal Memory Plus Surround modes and their featuresDSP Surround Simulation Video Game Use Left Right buttons to set the room size Initial Room Size MEDEffect Level DSP surround simulation Use Left Right buttons to set the delay time Initial Default Y/N When press the Down button When press the UP buttonPress the Surround Parameter button Surround modes and parameters Surround parameters e Listening to the Radio Auto preset memory Manual tuning Auto tuningSet the input function to Tuner Recalling preset stations Preset stations Initialization of the Microprocessor Last Function Memory Additional Information Speaker setting examplesSurround Dolby Digital compatible media and playback methods Dolby Digital and Dolby Pro LogicDolby Pro Logic DTS compatible media and playback methods DTS Digital Surround Troubleshooting Stereo SpecificationsAudio section Mono VDP List of Preset Codes / Liste DE Codes Préréglés DVDVCR Francais English 16-11, Yushima 3-CHOME, BUNKYOU-KU, Tokyo 113-0034, Japan Page Page Page