Auto tuning, Manual tuning | Denon 483, AVR-1403 manual

ENGLISH

Auto tuning

1	3	4	1	Set the input function to “TUNER”.

B

2		2		Watching the display, press the BAND button to select the
2		2


				desired band (AM or FM).

3	Press the MODE button to set the auto tuning mode.
	Lit
4	Press the TUNING UP or DOWN button.

• Automatic searching begins, then stops when a station is tuned in.

NOTE:

• When in the auto tuning mode on the FM band, the “STEREO” indicator lights on the display when a stereo broadcast is tuned in. At open frequencies, the noise is muted and the “TUNED” and “STEREO” indicators turn off.

Manual tuning

1 Set the input function to “TUNER”.

2	Watching the display, press the BAND button to select the
	Watching the display, press the BAND button to select the
	desired band (AM or FM).

NOTE:

3		Press the MODE button to set the manual tuning mode.
		Press the MODE button to set the manual tuning mode.
		Check that the display’s “AUTO” indicator turns off.

	4	Press the TUNING UP or DOWN button to tune in the desired
		Press the TUNING UP or DOWN button to tune in the desired
		station.
		The frequency changes continuously when the button is held
		in.

•When the manual tuning mode is set, FM stereo broadcasts are received in monaural and the “STEREO” indicator turns off.

40

Image 40

Denon 483, AVR-1403 manual Auto tuning, Manual tuning, Set the input function to Tuner

Contents

AVR-1403/483 Nous vous remercions pour l’achat de cet appareil English Francais Safety Instructions Table of Contents Before Using Features Part Names and Functions Front Panel Remote control unit System System SET UP Finally, setting up the system Setting UP the Speaker SystemsRead this First Connecting the audio components ConnectionsUse the AC Outlet for audio equipment only. Do not use It for hair driers, etc Connecting the video equipments Audio OUT Video OUT Connecting a Video game equipment Connecting the antenna terminals AM loop antenna assembly Speaker system connections Connecting the speaker cordsSpeaker Impedance Protector circuit Range of operation of the remote control unit Using the Remote Control UnitInserting the batteries Setting UP the System Use the following buttons to set up the system System SET UP Front LargeCenter Small SURR. Small Setting the Subwoofer Mode SW Mode NormWoofer YES Preparations Setting the speaker distanceListening position Digital input setup After setting up the systemCoax DVD Terminal Initial Preset memory Audio component Remote Control UnitOperating Denon audio components Preset memory Video component Operating a video component stored in the preset memory For DVD playerFor video disc player VDP For video deck VCR Check that all connections are proper Turn on the power Button on the remote control unit to turn on the powerOperation Before operating To select the input mode from main unit To select the input mode from the remote control unitInput mode selection function Playing the input source Adjusting the sound quality tone After starting playbackDolby Digital DTS Turning the sound off temporarily muting Listening over headphonesChecking the currently playing program source, etc Mode AUTO, PCM, DTS or Analog button to switch to Playback using the external input EXT. in jacksFollow to 3 under Playing the input source Surround Adjust the level of the selected speakerBefore playing with the surround function Dolby Surround Pro Logic II mode Dolby PRO Logic Dimension setting Center Width settingDefault setting Surround parameters q Pro Logic II Mode Cinema EQ OFF Dolby PLII, Dolby PROLOGIC, Dolby DIGITAL, DTS Default COMP. OFFSurround parameters w Cinema EQ. Cinema Equalizer COMP. Dynamic Range Compression Surround modes and their features DSP Surround SimulationVideo Game Personal Memory Plus Room Size MED Effect LevelDSP surround simulation Use Left Right buttons to set the room size Initial Default Y/N Use Left Right buttons to set the delay time Initial When press the Down button When press the UP buttonPress the Surround Parameter button Surround parameters e Surround modes and parameters Auto preset memory Listening to the Radio Manual tuning Auto tuningSet the input function to Tuner Preset stations Recalling preset stations Last Function Memory Initialization of the Microprocessor Additional Information Speaker setting examplesSurround Dolby Digital compatible media and playback methods Dolby Digital and Dolby Pro LogicDolby Pro Logic DTS Digital Surround DTS compatible media and playback methods Troubleshooting Specifications Audio sectionMono Stereo VDP List of Preset Codes / Liste DE Codes Préréglés DVDVCR Francais English 16-11, Yushima 3-CHOME, BUNKYOU-KU, Tokyo 113-0034, Japan Page Page Page