Denon AVR-1403, 483 manual Surround, Before playing with the surround function

ENGLISH

13 SURROUND

Before playing with the surround function

•Before playing with the surround function, be sure to use the test tones to adjust the playback level from each speakers. This adjustment can be performed from the remote control unit, as described below.

•The adjustment with the test tones is only effective in the DOLBY/DTS SURROUND modes.

The adjusted playback levels for the different surround modes are automatically stored in the memory of each surround modes.

1	Set the DOLBY/DTS SURROUND (Dolby Pro Logic II or Dolby
	Digital or DTS) modes.
		SURROUND
		MODE
2	(Main unit)	(Remote control unit)
	Press the TEST TONE button.	T.TONE

1

2

12, 3 2

SURROUND

MODE TAPE·VCR

6 7

0CHANNEL

3	2		0
VIDEO SELECT	CD·MD/CDR·DVD/VDP			DISC SKIP+
TITLE
8		3	9
6		2		7
SYSTEM		SURROUND
SET UP	CH SELECT		MENU	MASTER
				VOL
	SELECT
T.TONE		STATUS		MUTING
RETURN		DISPLAY
CHANNEL		TV	VOLUME

RETURN

	(Remote control unit)	3	After completing the adjustment, press the TEST TONE
Test tones are output from the			button again.
different speakers. Use the channel			T.TONE
volume adjust buttons to adjust so
that the volume of the test tones is			RETURN
the same for all the speakers.	(Remote control unit)

NOTE: Please make sure the “AUDIO” position of the slide switch on the remote control unit.

(Remote control unit)

•After adjusting using the test tones, adjust the channel levels either according to the playback sources or to suit your tastes, as described below.

1 Select the speaker whose level you want to adjust.

B

(Main unit) (Remote control unit)

The channel switches as shown below each time the button is pressed.

FL	CNTR	FR	SR	SL
		SW

NOTE: Please make sure the “AUDIO” position of the slide switch on the remote control unit.

		2
2	Adjust the level of the selected speaker.	1

2

2 1

VIDEO SELECT CD·MD/CDR·DVD/VDP			DISC SKIP+
TITLE
8	3	9
6	2		7
SYSTEM	SURROUND
SET UP		MENU	MASTER
CH SELECT			VOL
SELECT
T.TONE	STATUS		MUTING
RETURN	DISPLAY
CHANNEL	TV	VOLUME

(Main unit) (Remote control unit)

The level of the selected speaker can be adjusted within the range of +12 to –12 dB using the SELECT (up and down) buttons.

Default setting of channel level is 0 dB.

29