Digi 90000566_H manual Options Port=port, Profile=profile, Consolemanagement, Localconfig

	set profile
Required	For Digi Connect products with two or more users, to use this command,
permissions	permissions must be set to one of the following:
	• For a user to display the profile settings for the line on which they are
	logged in: “set permissions s-profile=r-self”
	• For a user to display the profile settings for any line: “set permissions s-
	profile=read”
	• For a user to display and set the profile settings for the line on which
	they are logged in: “set permissions s-profile=rw-self”
	• For a user to display the profile settings for any line, and set modem
	emulation settings for the line on which the user is logged in:
	“set permissions s-profile=w-self-r”
	• For a user to display and set the profile settings on any line:
	“set permissions s-profile=rw”
	See "set permissions" on page 157 for details on setting user permissions
	for commands.
Syntax	Configure port profile settings
	set profile port=port profile=profile
	Display current port profile settings for all available serial ports
	set profile
	Display current port profile settings for a particular serial port
	set profile port=port
Options	port=port
	The serial port number or range of serial ports associated with the port
	profile. Required when configuring port profiles.
	profile=profile
	The port profile to use for the serial port. Required when configuring port
	profiles. Choosing a particular port profile causes the serial port’s
	configuration to be reset to defaults, and then for the default settings for
	that port profile to take effect.
	Depending on the port-profile choices available for the device, the value
	of “profile” can be one of the following:
	console_management
	Associates the Console Management port profile with the port. Not
	supported in Digi Connect WAN.
	local_config
	Associates the Local Configuration port profile with the port.
	modem_emulation
	Associates the Modem Emulation port profile with the port. Not
	supported in Digi Connect WAN.
	realport
	Associates the RealPort port profile with the port.

Chapter 2 Command Descriptions 173