Digi 90000566_H manual Authentication=, Open, Wepauth, Wpapsk, Wpaauth, Leap

set wlan

authentication=

{[open],[sharekey],[wep_auth],[wpa_psk],[wpa_auth],[leap],[any]} The types of authentication that are allowed to establish a connection with the access point.

open

IEEE 802.11 open system authentication is used to establish a connection with the access point.

sharedkey

IEEE 802.11 shared key authentication is used to establish a connection with the access point. At least one WEP key must be specified to use shared key authentication.

wep_auth

IEEE 802.1x authentication (EAP) is used to establish a connection with an authentication server or access point. Wired Equivalent Privacy (WEP) keys are dynamically generated to encrypt data over the wireless link.

wpa_psk

The Wi-Fi Protected Access (WPA) protocol is used with a pre-shared key (PSK) that you specify to establish a connection with the access point and encrypt the wireless link.

wpa_auth

The WPA protocol and IEEE 802.1x authentication (EAP) is used to establish a connection with an authentication server or access point. Encryption keys are dynamically generated to encrypt data over the wireless link.

leap

Lightweight Extensible Authentication Protocol (LEAP) is used to establish a connection with an authentication server or access point. Wired Equivalent Privacy (WEP) keys are dynamically generated to encrypt the wireless link. A username and password must be specified to use leap.

any

Sets all authentication types.

Chapter 2 Command Descriptions 245