Digi 90000566_H manual Connidletimeout=nonetimeout value, Revertdeviceid

set mgmtglobal

connidletimeout={nonetimeout value}

	Enables or disables the idle timeout for the Connectware Manager
	connection between device and server. Specifying “none” disables the
	idle timeout. Specifying a timeout value enables the idle timeout, which
	means the connection will be dropped, or ended, after the amount of time
	specified. The default is “on.” The minimum value is 300 and the
	maximum 43200.
	In contrast to TCP keep-alives, the timeout managed by the
	"connidletimeout" option is at the Connectware Manager application
	level. The "connidletimeout" option provides a way for the connection to
	the Connectware Manager server to be closed if no Connectware
	Manager protocol data is sent or received for some period of time. This
	capability is particularly useful for server-initiated connections. When a
	user at the server side requests that a connection be established to a
	device, that user needs to explicitly terminate the connection when they
	are done with the device. This timeout permits a way to configure the
	device such that a "forgetful user" does not inadvertently leave the
	connection in place, which could cost money on a cellular connection if
	Connectware or TCP keepalives are enabled and transferred needlessly
	between device and server.
	revertdeviceid
	Reverts the device ID to factory settings. If the device’s MAC address is
	GG:HH:JJ:KK:LL:MM, then the device ID is set to
	0x0000000000000000GGHHJJffffKKLLMM.
Examples	Set the device id
	#> set mgmtglobal deviceid=0x0123456789abcdef0123456789abcdef
See also	• "revert" on page 61.
	• "show" on page 249.
	• For more information on Connectware Manager, see the Connectware
	Manager Operator’s Guide, and the Connectware Manager online help.

142 Chapter 2 Command Descriptions