Digi 90000566_H manual Options Accesscontrol, Arp, Buffers

display

•Virtual Private Network (VPN) information, including Security Association (SA) database entries and Security Policy Database (SPD) entries.

•Typical wireless LAN (WLAN) parameters for wireless devices.

	100% CPU Utilization may indicate encryption key generation is in-progress
	There may be instances when a “display device” command returns a CPU
	utilization of 100%. A CPU usage this high may indicate that encryption key
	generation is in-progress. On initial boot, the Digi device generates some
	encryption key material: an RSA key for SSL/TLS operations, and a DSA
	key for SSH operations. This key-generation process can take as long as
	40 minutes to complete. Until the corresponding key is generated, the Digi
	device will be unable to initiate or accept that type of encrypted connection.
	It will also report itself as 100% busy but, since key generation takes place
	at a low priority, the device will still function normally. On subsequent
	reboots, the Digi device will use its existing keys and will not need to
	generate another unless a reset to factory defaults is done, which will
	cause a new key to be generated on the next reboot.
Required	For Digi Connect products with two or more users, permissions must be set
permissions	to “set permissions display=execute” to use this command. See
	"set permissions" on page 157 for details on setting user permissions for
	commands.
Syntax	display {accesscontrolarpbuffersddnsdevicegpiomemorymobile
	natnetdevicepassthroughpppstatsprovisioningroutesadb
	serialsocketsspdswitchestcpudpuptimeversionvpnwlan}
Options	accesscontrol
	Displays access control status information.
	arp
	Displays ARP table entries.
	buffers
	Displays the contents of a port buffer. This option is covered in more
	detail in "display buffers" on page 37.

28 Chapter 2 Command Descriptions