set rciserial
184 Chapter 2 Command Descriptions
set rciserial
Devices
supported This command is supported in Connect Family and Digi Cellular Family
products. Not supported in ConnectPort Display.
Purpose Used to:
• Turn on/off RCI serial mode on the first serial port. The RCI serial mode
is a mode that allows a configuration file to be loaded over a serial port
when the DSR input signal is high.
• Display current RCI serial-mode settings.
Required
permissions For Digi Connect products with two or more users, to use this command,
permissions must be set to one of the following:
• For a user to display the RCI serial settings for any line:
“set permissions s-rciserial=read”
• For a user to display and set the RCI serial settings on any line:
“set permissions s-rciserial=rw”
See "set permissions" on page 157 for details on setting user permissions
for commands.
Syntax Turn on off RCI serial mode
set rciserial [state={on|off}]
Display current RCI serial-mode settings
set rciserial
Options state
Enables (on) or disables (off) RCI serial mode on the port. The default is
“off.”
Example set rciserial state=on
See also • "backup" on page 18.
• "revert" on page 61.
• "show" on page 249.