Digi 90000566_H Set mgmtglobal, Set permissions s-mgmtglobal=read, Options Deviceid=hex string

set mgmtglobal

set mgmtglobal

Devices	This command is supported in all products except Digi Connect ES and
supported	ConnectPort Display.
Purpose	The Connectware Manager server allows devices to be configured and
	managed from remote locations. This command is used to set or display
	the Connectware Manager global settings, or revert the device ID to factory
	settings.
Required	For Digi Connect products with two or more users, to use this command,
permissions	permissions must be set to one of the following:
	• For a user to display the Connectware Device Protocol global settings:
	“set permissions s-mgmtglobal=read”
	• For a user to display and set Connectware Device Protocol global
	settings: “set permissions s-mgmtglobal=rw”
	See "set permissions" on page 157 for details on setting user permissions
	for commands.
Syntax	Configure Connectware Manager global settings
	set mgmtglobal [deviceid={hex string}]
	[rcicompressionenabled={onoff}]
	[tcpnodelayenabled={onoff}]
	[tcpkeepalivesenabled={onoff}]
	[connidletimeout={nonetimeout value}]
	Display Connectware Manager global settings
	set mgmtglobal
	Revert the Device ID to factory settings
	set mgmtglobal revertdeviceid
Options	deviceid={hex string}
	Used to specify the device ID. The device ID is 32 hexadecimal digits,
	preceded by the characters “0x.”

140 Chapter 2 Command Descriptions