Digi 90000566_H manual Revert multiple settings, Time

revert

revert

Devices	This command is supported in all Digi Connect products.
supported
Purpose	Sets a particular group of a devices’ settings to its default values.
	The “revert” command keywords are used one at a time to revert one group
	of settings. You cannot enter several keywords on a single command to
	revert multiple settings.
	If you enter “revert user,” “revert group,” or “revert permissions,” a message
	is displayed indicating that those settings cannot be reverted individually,
	and instead must be reverted all together at the same time via the “revert
	auth” command. The “revert auth” command (revert authentication and
	authorization) reverts all users, all groups, and all permissions at the same
	time.
Required	No “set permissions” option is required for all “revert” command variants
permissions	except “revert all.” The permissions used by the various “set” commands
	apply to the various “revert” command variants. “revert all” uses a different
	mechanism that bypasses the individual “set” commands, and therefore
	has its own permissions. To execute the “revert all” command, a user must
	have permissions set to “set permissions revert-all=execute”. See
	"set permissions" on page 157 for details on setting user permissions for
	commands.
Syntax	revert [all
	accesscontrol
	alarm
	auth
	autoconnect [port=range]
	bsc
	buffer [port=range]
	ddns
	dhcpserver
	ekahau
	forwarding
	gpio
	host
	ia
	idle
	login
	menu
	mesh
	mgmtconnection
	mgmtglobal
	mgmtnetwork
	nat
	network
	passthrough
	pmodem [port=range]
	pppoutbound [port=range]
	profile [port=range]

Chapter 2 Command Descriptions 61