Digi 90000566_H Set tcpserial set tcpserial, Serial settings, TCP server raw socket, IP port

set tcpserial set tcpserial

Devices	This command is supported in all Digi Connect products.
supported
Purpose	Used to set behaviors of TCP serial connections, or display current TCP
	serial settings.
	This command affects the following TCP serial connections:
	• Connections made using the autoconnect feature.
	• Incoming network connections made to the following:
	• The TCP server (raw socket, IP port 2101)
	• The Telnet server (telnet socket, IP port 2001)
	• Secure Sockets Layer (ssl socket, IP port 2601)
Required	For Digi Connect products with two or more users, to use this command,
permissions	permissions must be set to one of the following:
	• For a user to display the TCP serial settings for the line on which they
	are logged in: “set permissions s-tcpserial=r-self”
	• For a user to display the TCP serial settings for any line:
	“set permissions s-tcpserial=read”
	• For a user to display and set the TCP serial settings for the line on
	which they are logged in: “set permissions s-tcpserial=rw-self”
	• For a user to display the TCP serial settings for any line, and set TCP
	serial settings for the line on which the user is logged in:
	“set permissions s-tcpserial=w-self-r”
	• For a user to display and set the TCP serial settings on any line:
	“set permissions s-tcpserial=rw”
	See "set permissions" on page 157 for details on setting user permissions
	for commands.
Syntax	Set behaviors of TCP serial connections
	set tcpserial port=range
	[hangupdcd={onoff}]
	[hangupdsr={onoff}]
	[idletime={0n}]
	[sid={onoff}]
	[sidstring=socketid string]
	[buffered={onoff}]
	[sendcount=1-65535 bytes]
	[sendtime={01-65535ms}]
	[endpattern=string]
	[strippattern={onoff}
	Display TCP serial settings
	set tcpserial [port=range]

212 Chapter 2 Command Descriptions