Digi 90000566_H manual Output, State, Ip address, Primary dns addr, Secondary dns addr, Tx bytes

display
Output	This section describe and interprets selected information and statistics
	output by the “display” command.
	Information returned by “display pppstats”
	The “display pppstats” displays status and activity information for a PPP
	link, and SureLink statistics.
	This information is specific to Digi Cellular Family products.
	PPP status and activity information
	In these status and activity values, a “session” is a PPP session. The
	session statistics are reset to zero at the start of a new PPP link. The “total”
	statistics are the accumulated totals for all sessions since the device
	booted.
	state
	The current state of the PPP link. “Active” indicates that a PPP link is up.
	“Inactive” means the PPP link is down. Inactive is indicated when the link
	is coming up, or going down.
	ip address
	The PPP WAN IP address of the Digi device. This is the IP address used
	to communicate over the cellular network. This IP address is assigned by
	the carrier most of the time, but can also be given to the network by the
	Digi device.
	primary dns addr
	secondary dns addr
	These are addresses for the DNS nameservers, used for performing
	name lookups. These DNS addresses are assigned by the carrier most
	of the time, but can also be assigned by users.
	tx bytes
	rx bytes
	The total number of bytes transmitted (tx) or received (rx) over the PPP
	link since the last reboot.
	session tx bytes
	session rx bytes
	The number of bytes transmitted (tx) or received (rx) over the PPP link in
	the current PPP session.

32 Chapter 2 Command Descriptions