Digi 90000566_H manual Inner and outer protocols, Configure wireless settings

set wlan

Inner and outer protocols

The following table shows relationships between outer protocols and inner protocols specified on the “set wlan” command. Outer protocols are the types of Extensible Authentication Protocols (EAP) that are allowed to establish the initial connection with an authentication server or access point. The outer protocols are specified by the “outer_eap” option. Inner protocols are the types of protocols that are allowed to authenticate the device. These protocols are used within the encrypted connection established by PEAP or TTLs. The inner protocols are specified by the “inner eap” option.

	Inner		Outer Protocols:
	Protocols:
		PEAP		TLS	TTLS
	GTC	X
	MD5	X			X
	MSCHAPv2	X			X
	OTP	X			X
	TLS	X			X
	CHAP				X
	MSCHAP				X
	MSCHAPv2				X
	PAP				X
Syntax
	Configure wireless settings

set wlan [protmode={bssibss_createibss_joinany}] [channel={01-14}]

[ssid=string]

[authentication={[open],[sharedkey],[wep_auth],[wpa_psk], [wpa_auth],[leap],[any]} [encryption={[open],[wep],[tkip],[ccmp],[any]}] [outer_eap={[peap],[tls],[ttls],[any]}] [inner_eap={[gtc],[md5],[mschapv2],[otp],[chap],[mschap], [ttls_mschapv2],[pap],[any]}] [options={[diversity],[short_preamble],[verify_cert]}] [username=string]

[password=string] [psk=string] [wepmode={64bit128bit}] [wepindex=1-4] [wepkeyN=hex string]] [country=string] [maxtxrate={125.511}] (Mbps) [txpower={6810121416}] (dBm)

Chapter 2 Command Descriptions 243