Digi 90000566_H manual Timedperiod=period, Timedoffset=immediateoneperiodrandomtime, Immediate

set mgmtconnection

on

Enables this instance for use.

off

Disables this instance for use.

timedperiod=period

For a timed connection, this option is used to specify the time interval in minutes between the device server's attempts to connect to the Connectware Manager server. If a device server is already in a connection to a Connectware Manager when the time interval expires, it will not start a new connection at that time. Rather, the device server will start a new timed period timer, and it will again check whether it needs to connect to the Connectware Manager when that new timer expires.

timedoffset={immediateoneperiodrandomtime}

For a timed connection, this option is used to specify when the first timed connection (to a Connectware Manager) should be attempted after the device server boots.

immediate

Attempt to connect immediately.

oneperiod

Wait one full timed period, then attempt to connect.

randomtime

Wait some random interval of time, between 0 and the full timed period, then attempt to connect.immediate

lkaupdateenabled={onoff}

In conjunction with a server-initiated connection, this option enables or disables a connection to a Connectware Manager server to inform that server of the IP address of the device server. This permits the Connectware Manager to connect back to the device server, or to dynamically update a DNS with the IP address of the device.

on

Enables "last known address" connections to the Connectware

Manager.

off

Disables "last known address" connections to the Connectware

Manager.

138 Chapter 2 Command Descriptions