Digi 90000566_H manual Close, Session Type Default Escape Keys, Connection number

close

close

Devices	This command is supported in all Digi Connect products.
supported
Purpose	Closes active connect, Rlogin, and Telnet sessions; that is, sessions
	opened by “connect,” “rlogin,” or “telnet” commands.
	The “close” command is associated with the sessions displayed by the
	“status” command.
	A “close” command issued without any options closes the current
	connection.
	To issue the “close” command, you must escape the active session. Do this
	by pressing the escape key defined for your session type. The following
	table lists default escape keys.
	Session Type	Default Escape Keys
	Connect	Ctrl+[+Enter
	Rlogin	~+Enter
	Telnet	Ctrl+]+Enter
Syntax	close [{*connection number}]
Options	*
	Closes all active sessions.
	connection number
	Identifies the session to close by its session number.
Examples	Close a session identified by number
	#> close 1
	Close the current session
	#> close
	Close all active sessions
	#> close *
See also	• "kill" on page 49. The kill command has a broader effect than close, and
	lets you kill connections from the global list. That is, it is not limited to
	sessions associated with the current connection.

• "status" on page 254 for information on displaying status information on active sessions.

• "connect" on page 22

• "rlogin" on page 66

• "telnet" on page 255

Chapter 2 Command Descriptions 21