Digi 90000566_H manual Set system, Options Description=string, Location=string, Contact=string

	set system
set system
Devices	This command is supported in all Digi Connect products.
supported
Purpose	Configures and displays system-identifying information, such as a
	description of the device, its location, and a contact person.
Required	For Digi Connect products with two or more users, permissions must be set
permissions	to “set permissions s-service=read” to display network service settings, and
	“set permissions s-services=rw” to display and change network service
	settings.
Syntax	Change system-identifying information
	set system [description=stringlocation=stringcontact=string]
	Display system-identifying information
	set system
Options	description=string
	A description of this device. The maximum length is 64 characters. The
	default is “”.
	location=string
	The location of this device. The maximum length is 64 characters. The
	default is “”.
	contact=string
	The contact for this device. The maximum length is 64 characters. The
	default is “”.
Examples	Set description, contact, and location
	#> set system description=”Engineering printer” location=”Room 1347”
	contact=”John Doe at x-3749”
See also	• "revert" on page 61.
	• "show" on page 249.

Chapter 2 Command Descriptions 211