Digi 90000566_H Options Trapdestip=ipaddress, Publiccommunity=string, Privatecommunity=string

set snmp set snmp

Devices	This command is supported in all Connect Family and Digi Cellular Family
supported	products. Not supported in ConnectPort Display.
Purpose	Configures the Simple Network Management Protocol (SNMP) agent, or
	displays current SNMP settings.
Required	For Digi Connect products with two or more users, permissions must be set
permissions	to “set permissions s-snmp=read” to display network service settings, and
	“set permissions s-snmp=rw” to display and change network service
	settings. See "set permissions" on page 157 for details on setting user
	permissions for commands.
Syntax	Set SNMP settings
	set snmp [trapdestip=ipaddress]
	[publiccommunity=string]
	[privatecommunity=string]
	[setsenabled={onoff}]
	[authfailtrap={onoff}]
	[coldstarttrap={onoff}]
	[linkuptrap={onoff}]
	[logintrap={onoff}]
	Display SNMP settings
	set snmp
Options	trapdestip=ipaddress
	Used to configure the IP address of the system to which the agent should
	send traps. To enable any of the traps, a non-zero value for trapdestip
	must be specified.
	The ”trapdestip” option is required in order for alarms to be sent in the
	form of SNMP traps. See "send" on page 67.
	publiccommunity=string
	The password required to “get” SNMP-managed objects. The default is
	“public”.
	privatecommunity=string
	The password required to “set” SNMP-managed objects. The default is
	“private”.
	setsenabled={onoff}
	Enables or disables “sets” of SNMP-managed objects.
	on
	Enables “sets” if the provided private community matches the current
	private community.
	off
	Disables “sets” even if the provided private community matches the
	current private community.
	The default is “off.”

198 Chapter 2 Command Descriptions