Digi 90000566_H manual Set mgmtnetwork, Options Networktype=modempppethernet802.11, Modemppp

set mgmtnetwork

set mgmtnetwork

Devices	This command is supported in all products except Digi Connect ES and
supported	ConnectPort Display.
Purpose	The Connectware Manager server allows devices to be configured and
	managed from remote locations. The “set mgmtnetwork” command
	configures the network settings for the Digi device’s connection to the
	Connectware Manager server so the device knows how to connect to the
	server.
Required	For Digi Connect products with two or more users, to use this command,
permissions	permissions must be set to one of the following:
	• For a user to display the Connectware Device Protocol network
	settings: “set permissions s-mgmtnetwork =read”
	• For a user to display and set Connectware Device Protocol network
	settings: “set permissions s-mgmtnetwork =rw”
	See "set permissions" on page 157 for details on setting user permissions
	for commands.
Syntax	Configure Connectware Manager network settings
	set mgmtnetwork
	[networktype={modempppethernet802.11}]
	[connectionmethod={autononemtmdhproxy}]
	[proxyaddress=string]
	[proxyport=port]
	[proxylogin=string]
	[proxypassword=string]
	[proxypersistentconnection={onoff}]
	[mtrxkeepalive=time]
	[mttxkeepalive=time]
	[mtwaitcount=count]
	[mdhrxkeepalive=time]
	[mdhtxkeepalive=time]
	[mdhwaitcount=count]
	Display Connectware Manager network settings
	set mgmtnetwork
Options	[networktype={modempppethernet802.11}
	The type of network to which this command applies.
	modemppp
	A modem PPP network.
	ethernet
	An Ethernet network.
	802.11
	An 802.11 network.

Chapter 2 Command Descriptions 143