Gid=number, Gname=string, Groupaccess=onoff | Digi 90000566_H

set user

name= string

Specifies the name of the user to be acted on.

newname=string Specifies a new user name.

gid=number

Specifies the identifier for the group being associated with a user. If omitted, the “gname” option must be specified.

gname=string

Specifies the name of the group being associated with a user. If omitted, the “gid” option must be specified.

commandline={onoff}

Specifies whether the user is allowed to access the command line of the device.

on

User can access the command line interface.

off

User can not access the command line interface.

The default is “on.”

groupaccess={onoff}

Specifies whether the user is allowed to use the access rights for any associated groups. This allows a group to define the access rights for users. For instance, if the user has “commandline=off” and an associated group has “commandline=on,” then the user will have command line access if “groupaccess=on.”

on

The user can use group access rights.

off

The user cannot use group access rights.

The default is “off.”

menu={noneindexname}

Specifies whether the user is allowed to access the custom menu interface of the device and defines the custom menu that the user will have displayed.

none

The user is not allowed to access the custom menu interface.

index

The user is allowed to access the custom menu interface and will be displayed the custom menu at the specified index.

name

User is allowed to access the custom menu interface and will be displayed the custom menu using the specified name.

The default is “none.”

222	Chapter 2 Command Descriptions

Image 222

Digi 90000566_H manual Gid=number, Gname=string, Groupaccess=onoff, User cannot use group access rights Default is off

Contents

Digi Connect Family Page Chapter Command Descriptions Chapter Introduction Contents Modem Emulation Commands Who 258Index 271 Contents T r o d u c t i o n Chapter Quick Reference for Configuring Features Quick Reference for Configuring FeaturesFeature/Task Commands Guide Feature/Task Commands Access the Command Line Configure an IP AddressAccess the Command Line Basic Command Information Escape Sequences for Special Characters Entering Special Characters in String ValuesEscape Processed as Sequence Length Limitations on String Values One-user Model User Models and User Permissions in Digi Connect ProductsIdentifying the User Model for Your Digi Connect Product Two-user Model Login Suppression Feature Increasing Security for Digi Device Users User Models and User Permissions in Digi Connect Products Verifying Device Support for Commands Verifying Device Support for Commands To=serveripaddressfilename From=serveripaddressfilename Boot Host ip addressLoad file Examples See also Session Type Default Escape Keys CloseConnection number Serial port Dhcpserver Ip address Display Dhcp server status Reserved active Assigned activeAssigned expired Reserved inactive Unavailable Address Offered pre-leaseReleased Set dhcpserver on Display Options Accesscontrol ArpBuffers Gpio DeviceDdns Memory Sockets SwitchesSerial Spd Display device information Display Virtual Private Network VPN status information Ip address OutputState Primary dns addr Reset status Administrative Last reset reasonNo service Non-administrative Session failures Lcp echo requestsSession successes Session consecutive failures Total link down requests Total bypasses Tftp=serverfilename Display buffersTail=number Server Output buffering information to a Tftp server Set buffer onDisplay port buffering information on the screen Output multi-port buffering information to a Tftp server Exit Help and ? help and ? Displaying Online Help on Info EthernetIcmp Displays statistics from the TCP table Displays statistics from the wireless Ethernet wlan tableStatistics, see Output on Displays statistics from the UDP table Statistic Description Ethernet statisticsIcmp statistics IP statistics Serial statistics TCP statistics UDP statistics Wireless Wlan statistics Display Icmp statistics Kill RangeConnection id Options Binary=onoffCrmod=onoff Newpass Id=numberName=string Interval=milliseconds IpaddressCount=0n Size=bytes Provision Display current provisioning parameters Given youEnter phone numbers as numbers only with no dashes Manually provision the module for a SIP-only network Mdn=mobile directory number Spc=service programming code MSLNai=network access id Min=mobile ID number Secha=secondary host agent IP address Ha=home addressPriha=primary host agent IP address Hass=host agent shared secret Type=iota Type=otaspOtaspnumber= Otasp number for example, *228 Tftp server ipfilename Program args Quit =serial port s=session Revert Revert multiple settingsAuth command. The revert auth command revert authentication Time Auth AlarmOptions all Autoconnect port=range Forwarding LoginEkahau Host Pppoutbound port=range ServicePmodem port=range Profile port=range Phase2 Vpn allglobaltunnelphase1phase2Phase1 Wireless Options Esc User=user name -luser name Send Off Set accesscontrolOptions Enabled=onoff Autoaddsubnets=onoff Subnip1-32=ipaddress Subnets will be allowed to access this device serverNetmask 255.255.255.0 to access this device server Subnmask1-32= mask Configure alarms for a range set multiple alarms Set alarmConfigure alarms with general options applies to all alarms Devices supported Purpose Required permissions Syntax Configure alarms based on signal strength Cdma Configure alarms based on data pattern matchingConfigure alarms based on mobile signal strength GSM Configure alarms based on mobile temperature From=string State= onoffMailserverip=ipaddress Cwm=onoff Cc=string To=string Pins=list of pins Highpins=list of highpinsLowpins=list of lowpins Triggerinterval=seconds Reminder=onoffReminderinterval=seconds Mode=match Celldata=byte count threshold Time=max time Mode=1xevdounavail Mode=configchangeMode=mobiletemp Mode=mobileunavail Set alarm #1 to designate which pins trigger alarm Error conditions triggering alarmsSet alarm #1 mode to Gpio mode Enable alarm #1 Set alarm Turn alarm #10 on Gpio input, Gpio output, or standard serialSet snmp on Set autoconnect State=onoff Service=rawrloginssltelnetRlogin Trigger=alwaysdatadcddsrstring Ipaddress=ipaddress Nodelay=onoffDescription=string Ipport=ipport Set serial on Network IP destination when data arrives on the serial portSet network on Set tcpserial on Set bsc Baudrate=baud rateexternalclock State=disabledenabledSerialmode=bisync3270bisync3275 Baud rate Pollingaddress=0x followed by 2 hex digits Codeset=asciiebcdicTextconversion=onoff Selectionaddress=0x followed by 2 hex digits Rxtimeout=milliseconds Poweronmessage=0x followed by up to 64 hex digits Noresponsemessage=0x followed by up to 64 hex digitsTxretries option Options Clear PortSize Buffer On mode and the buffer size to 64 kilobytesData will not be buffered and all data will be cleared from Pause For a user to display Dynamic DNS settings set permissions Update requests will be rejectedRegistered with that service Ddnsupdater=read Action=updatenowclearstatus Service=disableddyndnsorgDisabled Updatenow Alternatehttp Ddpassword=passwordStandardhttp Securehttp Dynamic DNS service NochgDisplay on For a user to display Dhcp server settings set permissions User interface’s Network Configuration settingsCommand. See dhcpserver on Set dhcpserver set dhcpserver Set Item=scopeAction=setrevert Revert Endip=ip address Offerdelay=0-5000Startip=ip address Leasetime=timeinfinite Ip=ip address Item=reservationRange=1-16all Clientid=client MAC address Item=exclusion Range=1-4allFirst address in the exclusion block IP address, which is the purpose of a reservation Using the web UIDisable all reservations that were previously added Is, reservations override exclusions 102 Command Descriptions Web user interface, the online help for Network Settings Dhcpserver onDhcp terminology and managing Dhcp server operation Digi Connect Wi-EM only Wireless deviceSet ekahau set ekahau Proprietary hardware components Id=device id Server=hostnameip addressName=device name Enable Ekahau Client Set identifiers Half Set ethernetOptions Duplex Full Speed 100 Set forwarding Privileges Action=addchangedelete Options ipforwarding=onoffStaticrouteindex=1-8 Add Gateway=ip address Net=destination ip addressMask=subnet mask Metric=1-16 Settings under Network Configuration Routing informationSet nat on Options Range=1-n Set gpioDevices supported Purpose Mode=serialinputoutput Messages or Snmp traps when Gpio pins change Pin Number Default Serial Signal Signal DirectionSignals Default serial signal settings for Gpio pins Remove Set groupOptions Add Id=range Commandline Commandline=onoffDefaultaccess=nonecommandlinemenu Name= string Default Permissions Examples Device support Options Name=name Set ia Configure serial-port connected devices set ia serial Configure network-based masters set ia master Serial= range Instead of a set ia command with no optionsSerial settings, which include Serial options Idletimeout=0=disabled1-99000 seconds Slavetimeout=10-99999 ms applies to slave onlyChartimeout=3-99999 ms applies to master or slave Table=1..8 applies to master only Priority=highmediumlow Medium Modbus options Master=range Modbusrtu Modbusascii Modbustcp Messagetimeout=100-99000 msChartimeout=3-99000 ms Type=tcpudp 126 Command Descriptions Moveroute=fromrouteindex,torouteindex Table optionsAddroute=route index Route options Port=serial port Mapto=protocol address Revert on page 61. The revert ia command options revert any Settings for the Digi Connect WAN IAConfiguration settings in the Web user interface Existing IA configuration settings Set login Options Suppress=onoff Quitkey=key Previouslabel=string Quitlabel=stringPreviouskey=key Presskeylabel=string Key Title=string subtitle=stringSortby=nonekeylabel Label Vertical Direction=horizontalverticalHorizontal Item=1-32 Menu displayed to the user upon selecting the menu item Command=stringSubmenu=string Contains spaces, enclose it in double quotes Set mgmtconnection Timedoffset=immediateoneperiodrandomtime Lkaupdateenabled=onoffTimedperiod=period Immediate Display current connection settings Clntreconntimeout=nonetimeoutRetry timeout interval feature Set values for the client connection Set permissions s-mgmtglobal=read Settings set permissions s-mgmtglobal=rwSet mgmtglobal Options Deviceid=hex string Rcicompressionenabled=onoff Tcpnodelayenabled=onoffTcpkeepalivesenabled=onoff Connidletimeout=nonetimeout value Revertdeviceid Modemppp Set mgmtnetworkOptions Networktype=modempppethernet802.11 802.11 Connectionmethod=autononemtmdhproxy Proxylogin=stringProxypassword=string Mdh Mdhtxkeepalive=time Mtwaitcount=countMdhrxkeepalive=time Mdhwaitcount=count Set nat set nat Protocol forwarding settingsSettings set permissions s-router=rw Supported are Maxentries=64-1024 Prenabled1-4=onoffPoenabled1-64=onoff Prnumber1-4=greesp Poexternal1-64=number of ports in range, minimum Poproto1-64=tcpudpPocount=1-64=number of ports in range, minimum Pointernal1-64=number of ports in range, minimum Network level Setting user permissions for commandsSet network Where Gateway=gateway ip Ip address optionsIp=device ip address Submask=device submask TCP keepalive options TCP retransmit options ARP options Arpttl=1-20 minutesGarp=30-3600 seconds Set passthrough Using Pinholes to Manage the Digi Cellular Family Device Remote Device Management and IP Pass-through Https=passterminate Options State=enableddisabledHttp=passterminate Telnet=passterminate Connectware=passterminate Surelink=passterminatePing=passterminate Help Set permissionsOn page 14 for more information Permission descriptions Set permissions Execute Backup=noneexecuteBoot=noneexecute Self Connect=noneexecute Rlogin=noneexecuteAccesscontrol=nonereadrw Dhcpserver=noneexecute Login=nonereadrw Alarm=nonereadrwDdnsupdater=nonereadrw Autoconnect=noner-selfreadrw-selfw-self-rrw Pmodem=noner-selfreadrw-selfw-self-rrw Service=nonereadrwPermissions=nonereadrw Ppp=nonereadrw Wlan=nonereadrw User=nonereadrwVpn=nonereadrw Status=nonereadrw Configure modem emulation Enables modem emulationDisables modem emulation Display modem-emulation settings Modem Emulation Commands for descriptions of Digi Enables Telnet processingDisables Telnet processing Specific commands for modem-emulation configurations Set pppoutbound Chap Authmethod=nonePAPCHAPbothPap Both Protocolcompression=onoff Defaultgateway=yesnoAddressmask=ip address mask Addresscompression=onoff Asyncmap=hex string Lcpkeepalive=onoffLcpkaquiettime=10-86400 seconds 000A0000 N1-4=phonenumber Display pppstats command displays the current status of PPP Loginscript=chat scriptIpcpdnsenabled=onoff Dialscript=chat script Set profile set profile Or displays the current port-profile settingsPort as a console to access the command line interface Option’s description Profile=profile LocalconfigOptions Port=port Consolemanagement Tcpsockets TunnelingUdpsockets Displays current terminal-emulation settings Set puttyFor it to process Hostport=/com/0/com/1/vcom/0 Width=80132Height=10-60 Keyboardport=/com/0/com/1No Keyboard Underline Cursortype=noneblockunderlineverticalBlock Blinkcursor=onoff Characterset=host charset Set putty Complete list of allowed character sets is Character Set name Description Key mapping terminal emulation options Inseq=00-FF Deletekeymaprange=1-32Keymaprange=1-32 Outseq=00-FF Now, to delete the first 2 entries Emulation settingsWould enter One enter Command=filename Set pythonOptions Range=1 Options State Set realport Options Keepalive=onoffExclusive=onoff Set service keepalive=onoff, or clients such as autoconnect Probecount, probeinterval, garbagebyte, and overridedhcp Set rtstoggle Predelay=delay Postdelay=delay Set serial Altpin=onoff Flowcontrol=hardwaresoftwarenone Baudrate=bpsCsize=5678 Hardware Set service Options Range= rangeIpport=network port Delayedack=0-1000 Base network port number + serial port number Service Services Provided Network Port Number Command Descriptions 195 Index numbers and changing default port numbers Service table Device is configured for IP passthroughSet surelink on Publiccommunity=string Setsenabled=onoffOptions Trapdestip=ipaddress Privatecommunity=string Coldstarttrap=onoff Logintrap=onoffAuthfailtrap=onoff Linkuptrap=onoff Set sockettunnel Configure a socket tunnelDisplay current socket tunnel settings End initiated the tunnel Fromport=port number Toport=port number Ping Test Connection-failure settings can be disabled as wellSet surelink set surelink TCP Connection Test Display current SureLink settings Moduleresetconnectfailures=1-2550=offSystemresetconnectfailures=1-2550=off Options for Hardware reset thresholds Test=pingtcpdns Ping Dns Trigger=intervalidleInterval Dnsfqdn1=dns fqdn Interval=10-65535Ipport=1-65535 Dnsfqdn2=dns fqdn Display pppstats command displays connection and activity Statistics on page 35 for descriptions of these statistics Display current MEI settings Set switches set switchesConfigure MEI settings Used Mode=232485 Wires=twofourOptions Range=range 232 Revert on page 61. The revert switches command reverts Display on page 27. The display switches command displaysCurrent switch settings Set switches configuration Location=string Set systemOptions Description=string Contact=string Connections made using the autoconnect feature Serial settingsThis command affects the following TCP serial connections For a user to display the TCP serial settings for any line Sidstring=socketid string Strippattern=onoff Sendtime=01-65535msEndpattern=string Revert on Show on Display current terminal settings Command line of the deviceConfigure terminal settings Set term Connect WAN and ConnectPort Display Another service, the data will be sent to the serial portFor a user to display the UDP serial settings for any line Are logged in set permissions s-udpserial=r-self Port= range Sendcount= bytesSendtime=0 time Sidstring=string Clostime=timeRange=1-64 Identifies the range of UDP destinations to be displayed UDP serial settingsUDP port of the destination to which data is sent Data to be sent on to the network destination For a user to display user configuration attributes Change user configuration attributesDisplay user configuration attributes For a user to display and set user configuration attributes Two groups Maximum of 32 users can be definedAssociate Disassociate User is not allowed to access the custom menu interface Groupaccess=onoffUser cannot use group access rights Default is off Gid=number Group Defaultaccess=nonecommandlinemenugroupDefaultgroup=nonegidgname Gid Publickey=tftphostfilenameclear TftphostfilenameTftphost Set video Splashtime=0-30 seconds Password=vnc server password Server=vnc server ipaddrdns namePort=vnc server network port Configured globally Server services are enabled and disabled by the set serviceRemote Access VNC Client Settings VPN Settings and VPN Tunnel Settings Display current VPN settings Security associations SAs Set IKE/ISAKMP SA Phase 1 Options Set IKE/ISAKMP SA Phase 2 OptionsDisplay current VPN settings Identity=fqdnuser fqdnip address Identity=ip-address Dhgroup=125Pfs=onoff Tunnel options Name=tunnel nameNewname=tunnel name Mode=manually-keyed Remotevpnendpoint=fqdnip addressManually-keyed options Inboundspi=256 Sha1 Inboundauthentication=nonemd5sha1Md5 Inboundauthkey=ascii keyhex key Outboundspi=256 Outboundauthentication=nonemd5sha1Inboundenckey=ascii keyhex key Outboundauthkey=ascii keyhex key Mode=isakmp Encryption Authentication SA LifetimeIsakmp options Sharedkey=ascii keyhex key Authmethod=sharedkeydssrsa Set vpn phase1Authentication=md5sha1 Sharedkey Salifetimedata=0-232 Set vpn phase2Salifetime=10-232 Tunnel=1-2 Salifetime=60-232 Authentication=nonemd5sha1Encryption=nonedes3desaes Salifetimedata=0 232 kilobytes Configuring SettingsSet wlan Authentication methods and associated data fields PSK Configure wireless settings Inner and outer protocols Ssid=string Wepauth Authentication=Open Wpapsk Tkip Encryption=open,wep,tkip,ccmp,anyWep Ccmp Mschapv2 Password=stringGtc Otp Psk=string WepkeyN=hex string Settings... column to go to the command descriptions Issued to the deviceUser permissions for commands Show Show Command Descriptions 251 Configuration table entry or range of entries Display network configuration settingsDisplay settings for a particular user Command Descriptions 253 Session number Telnet Ip addrTcp port Options Statusconnectdisconnect ConnectDisconnect This command This command enables the tunnel at index 1 to be usedSet vpn on page 228. The set vpn command configures VPN Connections Management page in the Web user interface from Displays active connections to and from the device To set permissions who=execute to use this command. SeeWho who None at this time What Is Modem Emulation? What Is Modem Emulation?Modem Emulation Cable Signals Modes of Operation User Scenario Diagram a Common User Scenarios for Modem Emulation User Scenario Diagram B Incoming Modem Emulation Connection Connection Scenarios for Modem EmulationOutgoing Modem Emulation Connection Modem Emulation Pooling About the Commands in this Chapter Accepted But Ignored AT Commands Modem Emulation AT Command Set Emulation configuration scenarioFunction Result Command Code Modem Emulation Commands 265 Command Function Result Register Function Range Units Default Register Definitions Register Function Range Units Default Emulation commands Result CodesShort Long Form 270 Modem Emulation Commands D e ESP GRE PSK Self user permission 198 Snmp