Digi 90000566_H manual Set wlan, Configuring, Settings

								set wlan
set wlan
Devices		This command is supported in Digi Connect Wi-ME, Digi Connect Wi-EM,
supported		and Digi Connect Wi-SP devices.
Purpose		Configures wireless devices, or displays the status of wireless devices.
Required		For Digi Connect products with two or more users, permissions must be set
permissions		to “set permissions s-wlan=read” to display wireless settings, and “set
		permissions s-wlan=rw” to display and change wireless settings. See
		"set permissions" on page 157 for details on setting user permissions for
		commands.
Configuring		Following is information on how configuration choices for wireless devices,
wireless		such as the authentication method, affect other configuration choices, such
settings		as encryption types and other “set wlan” command options.
		Authentication methods and available encryption types
		The following table shows the authentication methods available for
		wireless devices, and the encryption types that apply to each method. The
		Xs show the encryption types that can be used with each authentication
		method. At least one encryption type must be selected if a particular
		authentication method is selected.
Encryption				Authentication Method:
Type:
	Open		Shared	WEP	WPA-PSK	WPA		LEAP
			Key	authentication	authentication
Open	X		X
WEP	X		X	X	X		X	X
TKIP					X		X
CCMP					X		X

Using "show wlan" to display authentication encryption methods

The "show wlan" command displays evaluation information about wireless LAN settings, including ineffective settings and a list of valid combinations. It displays whether encryption methods are specified and in use or not used by authentication methods, and whether setup of certain options appear to be complete. See the Examples section for "show" on page 249; for the results of "show wlan."

Chapter 2 Command Descriptions 241