Digi 90000566_H manual Ssid=string

set wlan

	Display wireless settings
	set wlan
	Or:
	show wlan
Options	Regarding command options “authentication encryption,” “outer_eap,”
	“inner_eap,” and “options:” These options have multiple values. More than
	one value may be specified for each option to indicate the set of allowed
	values. The actual value used will be determined by the capabilities of the
	wireless network.
	protmode={bssibss_createibss_joinany}
	Used to change the operation mode in which the device will work.
	bss
	Indicates that the device should join an access point.
	ibss_create
	Indicates the device will attempt to first join an Independent Basic
	Service Set (IBSS), and create one if it is unable to find one.
	ibss_join
	Indicates the device should attempt to join an IBSS or self-contained
	wireless network.
	any
	Enables all operation modes.
	Typically, the operation mode is “bss.” The default is “bss.”
	channel={01-14}
	Sets the frequency channel that the wireless Ethernet radio will use. A
	value of 0 indicates that the device will scan all frequencies until it finds
	one with an available access point or wireless network it can join. The
	default value is 10.
	ssid=string
	Used to specify the identifier of the wireless network that the device
	should be joined to. The default is an empty string, which indicates that
	the first wireless network that the device finds will be joined to.

244 Chapter 2 Command Descriptions