Digi 90000566_H Mtwaitcount=count, Mdhrxkeepalive=time, Mdhtxkeepalive=time, Mdhwaitcount=count

set mgmtnetwork

mtwaitcount=count

Used to specify the wait count when the connection method is “mt,” where count is how many timeouts occur before the Digi device assumes the connection to the Connectware Manager server is lost and drops the connection.

mdhrxkeepalive=time

Used to specify the transmit keep alive time when the connection method is “mdh,” where time is the number of seconds to wait between sending keep-alive messages.

mdhtxkeepalive=time

Used to specify the receive keep alive time when the connection method is “mdh,” where time is the number of seconds to wait for a keep-alive message from the Connectware Manager server before assuming the connection is lost.

	mdhwaitcount=count
	Used to specify the wait count when the connection method is “mdh,”
	where count is how many timeouts occur before the Digi device assumes
	the connection to the Connectware Manager server is lost and drops the
	connection.
Examples	Set instance 1 for proxy connection
	#> set mgmtnetwork connectiontype=modemppp connectionmethod=proxy
	proxyaddress=”What goes here?” proxyport=40002 proxylogin=”johnsmith”
	proxypassword=”testpass” proxypersistentconnection=off
	Set instance 2 for mdh connection
	#> set mgmtnetwork connectiontype=ethernet connectionmethod=mdh
	mdhrxkeepalive=100 mdhtxkeepalive=110 mdkwaitcount=15
	Display current Connectware Device Protocol network settings
	#> set mgmtnetwork
See also	• "revert" on page 61.
	• "show" on page 249.
	• For more information on Connectware Manager, see the Connectware
	Manager Operator’s Guide, and the Connectware Manager online help.

Chapter 2 Command Descriptions 145