Digi 90000566_H Addressmask=ip address mask, Defaultgateway=yesno, Protocolcompression=onoff

set pppoutbound

address_mask=ip address mask

The IP mask to apply to the address specified on the “remote address” and “local address” options. When you specify a specific IP address on the “remote address” and “local address” options, this option modifies the meaning of the IP address for routing purposes. The default is 255.255.255.255.

default_gateway={yesno}

Selects whether to use the PPP interface as the default route. The default is “no.”

protocol_compression={onoff}

Specifies whether the device server attempts to negotiate protocol compression on PPP connections.

on

The device server attempts to negotiate protocol compression on PPP connections.

off

The device server will not negotiate protocol compression.

The default is “on.”

address_compression={onoff}

Specifies whether the device server attempts to negotiate address compression on PPP connections.

on

The device server attempts to negotiate address compression.

off

The device server does not attempt to negotiate address compression.

The default is “on.”

header_compression={onoff}

Specifies whether the device server attempts to negotiate IP protocol header compression on PPP connections. This is commonly referred to as Van Jacobsen (VJ) header compression.

on

The device server attempts to negotiate IP protocol header compression.

off

The device server does not attempt to negotiate IP protocol header compression.

The default is “on.”

168 Chapter 2 Command Descriptions