Digi 90000566_H manual N1-4=phonenumber

set pppoutbound

chap_id=chap id

A character string that identifies the outbound PPP user using CHAP authentication. This is equivalent to a user or login name. The string must be 32 or fewer characters and must be recognized by the peer.

chap_key=chap key

A character string that authenticates the outbound PPP user using CHAP authentication. This is equivalent to a password. The string must be 16 or fewer characters and must be recognized by the peer.

pap_id=pap id

A character string that identifies the outbound PPP user using PAP authentication. This is equivalent to a user (or login) name. The string must be 32 or fewer characters and must be recognized by the peer.

pap_password=pap password

A character string that authenticates the outbound PPP user using PAP authentication. This is equivalent to a password. The string must be 16 or fewer characters and must be recognized by the peer.

mru=256-1500

The maximum received unit (MRU), or frame size, in bytes, to be received from the other end of the PPP connection. This is a negotiated value. The default is 1500 bytes.

mtu=256-1500

The maximum transmission unit (MTU), or frame size, in bytes, to use for this PPP outbound connection. For PPP connections, the MTU is negotiated, so enter 1500, the largest size device server will permit the remote host to send. For PPP users, the range is 128 to 1500 bytes, and the default is 1500 bytes.

n{1-4}=phone_number

Up to four phone numbers to dial to request a PPP outbound connection. The phone numbers are dialed sequentially.

redial_attempts=attempts

The number of times the firmware will attempt to redial before giving up.

redial_delay=delay

The time to wait after an unsuccessful dial attempt.

rx_idle_timeout=timeout

The time, in seconds, after which if no data has been received over the link, the PPP connection is disconnected.

tx_idle_timeout=timeout

The time, in seconds, after which if no data has been transmitted over the link, the PPP connection is disconnected.

init_script=chat script

An initialization script, run once at interface startup. For example:

init_script="'' ATZ OK \c"

170 Chapter 2 Command Descriptions