Digi 90000566_H manual Set term, Command line of the device, Port for another purpose

	set term
set term
Devices	This command is supported in all Digi Connect products except
supported	ConnectPort Display.
Purpose	Allows for connecting a terminal to a device’s serial port and accessing the
	command line of the device.
	In the cases where the default access to the terminal and the command
	line is “on,” this command is important if users want to use the serial port
	for purposes other than having a command line. That is, they must change
	the state of the serial port access from “on” to “off” in order to use the serial
	port for another purpose.
Required	For Digi Connect products with two or more users, permissions must be set
permissions	to “set permissions s-term=read” to display terminal settings, and
	“set permissions s-term=rw” to display and change terminal settings.
Syntax	Configure terminal settings
	set term [state={onoff}]
	Display current terminal settings
	set term
Options	state={onoff}
	Specifies whether terminal access is enabled for the serial port. The
	default is “on” for Digi Connect WAN and Digi Connect RG devices.

Examples

#> set term

Serial Terminal Configuration :

port# state

1on

2on

See also	•	"revert" on page 61.
	•	"show" on page 249.

Chapter 2 Command Descriptions 215