set network
150 Chapter 2 Command Descriptions
Options [ip address options]
Set IP address-related options for the Digi device, including:
ip=device ip address
Sets the device IP address when DHCP is off. This option is only
applicable if the “static” option is set to “on.”
gateway=gateway ip
Sets the network gateway IP address.
submask=device submask
Sets the device submask address when DHCP is off. This option is
only applicable if the “static” option is set to “on.”
The following three IP address options have a precedence. That is, if all
three options are turned on, the order of precedence is: “static,” “dhcp,”
“autoip.”
static={on|off}
When enabled, the device uses the specified IP address, gateway
address, and submask. The default is off.
dhcp={on|off}
When enabled, the device attempts to use the DHCP protocol to find
an IP address, gateway address, and submask. The default is “on.”
The "dhcp" option is enabled by default in almost all Digi Connect
devices, except "static" is enabled by default for these: All Digi
Connect WAN products except Digi Connect WAN IA (which is DHCP
default) and ConnectPort WAN VPN.
autoip={on|off}
When enabled, the device attempts to use the Auto IP protocol to find
an IP address, gateway address, and submask. The default is “on.”
dns1=primary dns server ip address
dns2=secondary dns server ip address
For DNS, these options specify the DNS nameservers to use. Name
lookups will be performed using the nameserver specified on “dns1”
first, and if that fails, the nameserver specified on “dns2” will be used.