Digi 90000566_H manual Dhcpserver, Ip address

	dhcpserver
dhcpserver
Devices	This command is supported in Digi Cellular Family products only.
supported
Purpose	Used for managing and showing the status of a DHCP server, including
	managing the leases for IP addresses, restarting, running, and shutting
	down the DHCP server, and displaying DHCP server status information.
Required	For Digi Connect products with two or more users, permissions must be set
permissions	to “set permissions connect=execute” to use this command. See
	"set permissions" on page 157 for details on setting user permissions for
	commands.
Syntax	dhcpserver [deletelease={ip addressall}]
	restart
	run
	shutdown
	status
Options	deletelease={ip addressall}
	Specifies how to handle IP address leases. You may remove leases from
	the DHCP Server while it is running.
	ip address
	Removes a specific lease from the DHCP server.
	all
	Removes all IP address leases from the DHCP server.
	Removing a lease will cause the associated IP address to be returned
	immediately to the available address pool. Any IP address in this
	available address pool may be served in a new lease to a DHCP client.
	If you stop or restart the DHCP server, or if you reboot the Digi Connect
	product, all knowledge of the IP address leases will be lost. All leased
	addresses, except for reservations, will be returned to the available
	address pool and may be served in a new lease to a DHCP client.
	Static lease reservations will always be displayed in the lease list. These
	reservation leases may be removed, but a new lease will be created
	immediately. To disable or permanently remove a reservation, use the
	“set dhcpserver” command. See the examples for "set dhcpserver" on
	page 96.
	restart
	Restarts the DHCP server.
	run
	Runs (starts) the DHCP server if it not already started.
	shutdown
	Shuts down the DHCP server.
	status
	Displays DHCP server status information.

Chapter 2 Command Descriptions 23