provision
Chapter 2 Command Descriptions 55
Use IOTA to provision the module
provision type=iota
spc=service programming code (MSL)(also known as master subsidy
lock or MSL)
mdn=mobile directory number
min=mobile ID number
Use OTASP to provision the module
provision type=otasp
otaspnumber=OTASP number - for example, *228 or *22899
Options SIP-only provisioning parameters
type=siponly
Specifies that the CDMA module is being provisioned using the
SIPONLY method.
spc=service programming code (MSL)
A six-digit number required to program CDMA module parameters.
This code is also known as a master subsidy lock or MSL.
mdn=mobile directory number
The phone number of the CDMA module.
min=mobile ID number
How the CDMA module is identified in the cellular network. Depending
on the cellular provider, this number may be the same as the mobile
directory number.
MIP provisioning parameters
type=mip
Specifies that the CDMA module is being provisioned using the MIP
method.
nai=network access id
Internet Authentication, Authorization and Accounting (AAA) protocols
such as RADIUS or DIAMETER identify users with the Network
Access Identifier (NAI). When used with Mobile IP and AAA, the NAI
is composed of a username and a realm, separated with “@”. The
username portion identifies the subscriber within the realm. The AAA
nodes use the realm portion of the NAI to route AAA requests to the
correct AAA server.
aaass=AAA shared secret
The shared secret used in authentication by Internet AAA protocols
such as RADIUS or DIAMETER.
The format of the shared secret differs depending on whether it is
entered in ASCII or hexadecimal, as specified by the “aaasstype”
option.
If “aaasstype=ascii,” enter the shared secret as a string in quotation
marks.
If “aaasstype=hex,” enter the shared secret as a hexadecimal number
with no leading “0x” or trailing “h.”