Digi 90000566_H manual Set serial, Altpin=onoff

	set serial
set serial
Devices	This command is supported in all Digi Connect products.
supported
Purpose	Sets and displays general serial configuration options, such as baud rate,
	character size, parity, stop bits, and flow control.
Required	For Digi Connect products with two or more users, to use this command,
permissions	permissions must be set to one of the following:
	• For a user to display the serial settings for the line on which they are
	logged in: “set permissions s-serial=r-self”
	• For a user to display the serial settings for any line:
	“set permissions s-serial=read”
	• For a user to display and set the serial settings for the line on which
	they are logged in: “set permissions s-serial=rw-self”
	• For a user to display the serial settings for any line, and set serial
	settings for the line on which the user is logged in:
	“set permissions s-serial=w-self-r”
	• For a user to display and set the serial settings on any line:
	“set permissions s-serial=rw”
	See "set permissions" on page 157 for details on setting user permissions
	for commands. Permissions for "set serial" also apply to the "set switches"
	command. See "set switches" on page 208.
Syntax	Set general serial options
	set serial port=range
	[altpin={onoff}]
	[baudrate=bps]
	[csize={5678}]
	[parity={noneevenoddmarkspace}]
	[stopb={12}]
	[flowcontrol={hardwaresoftwarenone}]
	Display current serial options
	set serial [port=range]
Options	port=range
	Used to specify the serial port. Optional on a single-port device.
	altpin={onoff}
	Determines whether the altpin option, which swaps DCD with DSR so
	that eight-wire RJ-45 cables can be used with modems, is used:
	on
	The altpin option is used.
	off
	The altpin option is not used.
	The default is “off.”

Chapter 2 Command Descriptions 189