Digi 90000566_H manual Set ddns set ddns, Name, Update requests will be rejected, Guidelines

set ddns set ddns

Devices	This command is supported in Digi Cellular Family products only.
supported
Purpose	Configures a Dynamic DNS (DDNS) service. DDNS allows a user whose
	IP address is dynamically assigned to be located by a host or domain
	name.
	A DDNS service provider typically supports the registration of only public IP
	addresses. When using such a service provider, if your Digi Cellular Family
	device has a private IP address (such as 192.168.x.x or 10.x.x.x), your
	update requests will be rejected.
	Your Digi Cellular Family device monitors the IP address it is assigned. It
	will typically update the DDNS service or server automatically, but only
	when its IP address has changed from the IP address is previously
	registered with that service.
	Important:
	• Before using this command, you must contact your DDNS service
	provider and create an account with them. Currently, the only supported
	DDNS service provider is Dynamic DNS (DynDNS.com). The provider
	will give you account information such as username and password that
	you will enter on this command to register the IP address of your Digi
	Cellular Family product with their service, and update it as it changes.
	• The DDNS service supports only public IP addresses. If you have a
	private IP address (such as 192.168.x.x or 10.x.x.x), your update
	requests will be rejected.
	• DDNS service providers may consider frequent updates to be an abuse
	of their service. In such a circumstance, the service provider may act by
	blocking updates from the abusive host for some period of time, or until
	the customer contacts the provider. Please observe the requirements of
	the DDNS service provider to ensure compliance with possible abuse
	guidelines.
Required	For Digi Connect products with two or more users, to use this command,
permissions	permissions must be set to one of the following:
	• For a user to display Dynamic DNS settings: “set permissions
	s-ddnsupdater=read”
	• For a user to display and set Dynamic DNS settings: “set permissions
	s-ddnsupdater=rw”
	See "set permissions" on page 157 for details on setting user permissions
	for commands.
Syntax	Set basic DDNS settings
	set ddns [service={disableddyndnsorg}]
	[action={updatenowclearstatus}]

92 Chapter 2 Command Descriptions