Digi 90000566_H manual Options State=enableddisabled, Http=passterminate, Https=passterminate

set passthrough

	Using the “set service” command with IP Pass-through
	You can use the “set service” command to have a network service
	terminate both at a port on the Digi Cellular Family device and a different
	port on the connected device. For example, you could have the Digi
	Cellular Family device terminate the SSH service on port 2222, and the
	connected device terminate SSH at port 22. To do so, you would issue a
	“set service” command to move the SSH server from listening on port 22 to
	listening on port 222. With such a configuration, both the Digi Cellular
	Family device an the connected box could respond to SSH.
Syntax	Configure IP pass-through mode
	set passthrough [state={enableddisabled}]
	[http={passterminate}]
	[https={passterminate}]
	[telnet={passterminate}]
	[ssh={passterminate}]
	[snmp={passterminate}]
	[connectware={passterminate}]
	[surelink={passterminate}]
	[ping={passterminate}]
	Display current IP pass-through mode settings
	set passthrough
Options	state={enableddisabled}
	Enables or disables IP Pass-through.
	http={passterminate}
	Specifies whether the HTTP network service is configured to pass to the
	connected device or terminate at the Digi Cellular Family device for
	purposes of managing it, known as a pinhole.
	https={passterminate}
	Specifies whether the HTTPS network service is configured to pass to the
	connected device (“pass”) or terminate at the Digi Cellular Family device
	for purposes of managing it, known as a pinhole (“terminate”).
	telnet={passterminate}
	Specifies whether the Telnet network service is configured to pass to the
	connected device (“pass”) or terminate at the Digi Cellular Family device
	for purposes of managing it, known as a pinhole (“terminate”).
	ssh={passterminate}
	Specifies whether the SSH network service is configured to pass to the
	connected device (“pass”) or terminate at the Digi Cellular Family device
	for purposes of managing it, known as a pinhole (“terminate”).
	snmp={passterminate}
	Specifies whether the SNMP network service is configured to pass to the
	connected device (“pass”) or terminate at the Digi Cellular Family device
	for purposes of managing it, known as a pinhole (“terminate”).

Chapter 2 Command Descriptions 155