Digi 90000566_H manual =serial port s=session

reconnect reconnect

Devices	This command is supported in all Digi Connect products.
supported
Purpose	Reestablishes a previously established connection; that is, a connection
	opened by a “connect,” “rlogin,” or “telnet” command. The default operation
	of this command is to reconnect to the last active session.
Required	For Digi Connect products with two or more users, permissions must be set
permissions	to “set permissions reconnect=execute” to use this command. See
	"set permissions" on page 157 for details on setting user permissions for
	commands.
Syntax	reconnect [{serial portp=serial ports=session}]
Options	serial port
	The serial port to which this command applies. Use this option to
	reconnect to a session opened by a connect command.
	p=serial port s=session
	The serial port number or session number (displayed by the “status”
	command) to reconnect to.
Example	Reconnect to the last port used
	#> reconnect
	Reconnect to port 1
	#> reconnect p=1
	Reconnect to session 1
	#> reconnect s=1
See also	• "connect" on page 22 for information on establishing a connection on a
	selected port.
	• "close" on page 21 for information on ending a connection.
	• "status" on page 254 for information on gathering status on current
	connections.
	• "rlogin" on page 66.
	• "telnet" on page 255.

60 Chapter 2 Command Descriptions