Verifying Device Support for Commands

Chapter 2

C o m m a n d D e s c r i p t i o n s

This chapter provides a description of each command in the Digi Connect Family Command-Line Interface.

Verifying Device Support for Commands

To verify whether a Digi Connect device supports a particular command or command options, and to get the allowed ranges and limits for command options, you can enter several commands. For example:

“help” displays all supported commands for a device.

“?” displays all supported commands for a device.

“set ?” displays the syntax and options for the “set” command. You can use this to determine whether the device includes a particular “set” command variant.

“help set” displays syntax and options for the “set” command.

“set serial ?” displays the syntax and options for the “set serial” command.

“help set serial” displays the syntax and options for the “set serial” command.

Some options may become available in new firmware revisions or before new documentation is released.

Some commands relate only to particular features unique to specific Digi products. For example, the “set wlan” command applies only to wireless products. Other commands may have options that are specific to features that are not available on all devices. For example, the “display” command’s “mobile” option applies only to Digi Cellular Family products.

Chapter 2 Command Descriptions

17

Page 17
Image 17
Digi 90000566_H manual Verifying Device Support for Commands