Digi 90000566_H manual Session number

status status

Devices	This command is supported in all Digi Connect products.
supported
Purpose	Displays the current list of sessions. The “status” command displays the
	status of outgoing connections (connections made by “connect,” “rlogin,” or
	“telnet” commands). In contrast, the “display” command displays real-time
	information about a device, while the “info” command displays statistical
	information about a device over time. Typically, the “status” command is
	used to determine which sessions to close.
Required	For Digi Connect products with two or more users, permissions must be set
permissions	to “set permissions status=read” or “set permissions status=rw” to use this
	command. See "set permissions" on page 157 for details on setting user
	permissions for commands.
Syntax	status [range] [session number]
Options	range
	The range of sessions to view.
	session number
	An index number identifying the session number to view.
Examples	#> status
	Connection: 3	From: 10.8.109.8
	Connection not associated with any sessions.
See also	• "connect" on page 22
	• "close" on page 21, for information on ending a connection.
	• "display" on page 27
	• "info" on page 41.

• "rlogin" on page 66

• "telnet" on page 255

• "who" on page 258

254 Chapter 2 Command Descriptions