Digi 90000566_H manual State= onoff, Mailserverip=ipaddress, From=string, Cwm=onoff

set alarm

Options	General alarm options
	state= {onoff}
	Enables or disables all alarms.
	on
	Enables all alarms.
	off
	Disables all alarms. To avoid false errors, it is recommended that you
	configure alarms while alarms are disabled, and enable alarms after
	they are fully configured.
	The default is “off.”
	mailserverip=ipaddress
	Used to configure IP address of the mail server to which alarm-triggered
	emails are sent.
	from=string
	The text to be included in the “from” field of an alarm-triggered email.
	cwm={onoff}
	Enables or disables sending of alarm notifications to the Connectware
	Manager server.
	on
	Send all alarm notifications to the Connectware Manager server. Turn
	this option on if your Digi Connect device is managed by Connectware
	Manager. Enabling this option is useful because it allows all alarms to
	be monitored from one location, the Connectware Manager. Enabling
	this option also allows Digi Connect devices to send alarms to clients
	that would otherwise be unreachable from the Digi Connect device,
	either because the Digi Connect device is behind a firewall or not on
	the same network as the alarm destination.
	off
	Disables sending of alarm notifications to the Connectware Manager
	server. Leave this option off if you do not manage your devices with
	Connectware Manager or if you wish to have alarms sent from the
	device, for example, because an SNMP trap destination is local to the
	device, not the Connectware Manager server.
	For more information on Connectware Manager, see the Connectware
	Manager Operator’s Guide, and the Connectware Manager online help.

72 Chapter 2 Command Descriptions