Digi 90000566_H manual Psk=string, WepkeyN=hex string

set wlan

psk=string

Used when the “security” option is set to “wpa_psk.” This option specifies a string that is converted into a pre-shared key (PSK) that is used for encryption.

wepmode={64bit128bit}

Specifies the key size used when WEP encryption is enabled. The default is 64bit.

wepindex=1-4

Specifies which of the 4 possible keys will be used. The default is 1.

wepkeyN=hex string

A hexadecimal string that serves as the key if WEP encryption is enabled. The key consists of 26, 10, or 0 (zero) hexadecimal digit characters. If “wepmode=64bit”, the wepkey is 10 digits. If “wepmode=128bit”, the wepkey is 26 digits. A wepkey value of 0 length clears the value.

country=string

The country in which the device will be used. By selecting a country, the channel settings will be restricted to the legal set for that country.

maxtxrate={125.511} (Mbps)

The maximum transmission rate that the device will use, in megabits per second.

txpower={6810121416} (dBm)

The wireless transmit power, in decibels relative to one milliwatt (dBm).

Example	#> set wlan		wepkey1=ab12cd34ef567ab12cd34ef567 wepindex=1
	#> set	wlan	wepmode=128bit
	#> set	wlan ssid="access point 1"
See also	• "revert" on page 61. The “revert wireless” option reverts the settings

configured by this command.

•"show" on page 249. "show wlan" displays

248 Chapter 2 Command Descriptions