Digi 90000566_H Configured globally, Server services are enabled and disabled by the set service

set vncclient

	keepalive={onoff}
	Indicates whether or not TCP keep-alives will be sent while connected to
	the VNC server. Keep-alives help to detect when a connection has been
	lost. TCP keep-alive parameters (such as how often to send them) are
	configured globally.
Example	#> set vncclient state=on server=10.20.1.107 port=5900 password=dnf10
	reconnect=10 shared=on localcursor=on
See also	• "revert" on page 61.
	• "set service" on page 191. The VNC Client Listen Daemon and VNC
	Server services are enabled and disabled by the “set service”
	command.
	• "set video" on page 225.
	• "show" on page 249.
	• The ConnectPort Display User’s Guide’s section titled “Configure
	Remote Access (VNC Client) Settings.”

Chapter 2 Command Descriptions 227