Digi 90000566_H manual Sidstring=socketid string

	set tcpserial
Options	port=range
	Used to specify the serial port. Optional on a single-port device.
	hangupdcd={onoff}
	Indicates whether an established network connection should be
	terminated when the serial port’s DCD signal drops. The default is “off.”
	hangupdsr={onoff}
	Indicates whether an established network connection should be
	terminated when the serial port’s DSR signal drops. The default is “off.”
	idletime=idletime={0n}
	Indicates that established network connection should be terminated if the
	serial port is idle for the specified amount of time in seconds. A value of
	0 (zero) disables this option. The default is 0.
	sid={onoff}
	Determines how the socket ID (SID) string in the “sidstring” option is
	handled.
	on
	The value for the “sidstring” option is sent to the network destination
	right before the first data bytes are sent to the network.
	off
	The value for the “sidstring” option is not sent to the network
	destination.
	The default is “off.”
	sidstring=socketid string
	When the “sid” option is set to on, this string is sent to the network
	destination right before the first data bytes are sent to the network. The
	maximum length of this string is 256 characters, including escape
	sequences for special characters. The maximum parsed length of this
	string is 256 characters. That is, this string must reduce down to a 256-
	character string when the escape sequences are processed. For more
	details on the escape sequences, see "Entering Special Characters in
	String Values" on page 13.
	buffered={onoff}
	Turning on this feature on allows controlling how serial data is sent out to
	the network. The “sendcount,” “sendtime,” “endpattern,” and
	“strippattern” options are used to control how data is sent out once the
	“buffered” option is set to “on.” The default is “off.”
	sendcount=1 - 65535 bytes
	Indicates that data from the serial port should be sent out to the network
	after buffering the given number of bytes. This option only is valid when
	the “buffered” option is “on.” The default is 1024 bytes.

Chapter 2 Command Descriptions 213