Installation, EN-12 | Acer X223W specs

X223W

INSTALLATION

To install the monitor to your host system, please follow the steps as given below:

Steps

1.1-1 Connect Video Cable

a.Make sure both the monitor and computer are powered-OFF.

b.Connect the VGA video cable to the computer.

1-2 Digital Cable (Only Dual-Input Model)

a. Make sure both the monitor and computer are powered-OFF. b. Connect one end of the 24-pin DVI cable to the back of the monitor and connect the other end to the computer’s port.

2.Connect power cord

Connect the power cord to the monitor, then to a properly grounded AC outlet.

3.Power-ON Monitor and Computer

Power-ON the monitor first, then power-ON the computer. This sequence is very important.

4.If the monitor still does not function properly, please refer to the troubleshooting section to diagnose the problem.

EN-12

Page 13

Image 13

Contents

Table of Contents EN-1 Special Notes on LCD Monitors EN-2 Information for your safety and comfort EN-3 Product servicing EN-4 Taking care of your vision EN-5 Unpacking Only Screen Position AdjustmentEN-6 EN-7 Connecting the Power Cord Cleaning Your Monitor Safety PrecautionLED EN-8 DDC Connector PIN AssignmentPIN no Description EN-9 EN-10 PIN EN-11 Standard Timing Table EN-12 Installation Menu / Enter User ControlsEN-13 EN-14 HOW to Adjust a Setting EN-15 ∙ Acer eColor Management OSD ∙ Operation instructions EN-16 User EN-17 ACM EN-18 X223W LED on TroubleshootingLED OFF EN-20 EN-21 EN-22 Federal Communications Commission Declaration of Conformity EN-23 Declaration of Conformity EN-24

Acer X223W manual Installation, EN-12

Models: X223W

INSTALLATION

EN-12