Acer X223W manual Safety Precaution, Cleaning Your Monitor, Led, EN-8

X223W

∙Plug one end of the power cord to the AC Inlet, plug another end to a proper AC outlet.

∙For unit using at 120 V AC:

Use a UL Listed Cord Set, Type SVT wire and plug rated 10 A/125 V.

∙For unit using at 220/240 V AC (outside of U.S.):

Use a Cord Set consisting of H05VV-F cord and plug rated 10 A, 250 V. The cord set should have the appropriate safety approvals for the country in which the equipment will be installed.

SAFETY PRECAUTION

∙Avoid placing the monitor, or any other heavy object, on the power cord to avoid damage to the cable.

∙Do not expose the monitor to rain, excessive moisture, or dust.

∙Do not cover the ventilation slots or openings of the monitor. Always put the monitor in a place where there is adequate ventilation.

∙Avoid placing the monitor against a bright background or where sun- light or other light sources may reflect on the face of the monitor. Place the monitor just below eye level.

∙Handle with care when transporting the monitor.

∙Refrain from giving shock or scratch to the screen, as screen is fragile.

CLEANING YOUR MONITOR

Please carefully follow the below guidelines when cleaning the monitor.

•Always unplug the monitor before cleaning.

•Use a soft cloth to wipe the screen and cabinet front and sides.

Power saving

The monitor will be driven into Power Saving” mode by the control signal from the display controller, as indicated by the amber-color power LED.

State	LED
	Light
ON	Blue
Power Saving	Amber
Mode

The power saving states will be kept until a control signal has been detected or the keyboard or mouse is activated. The recovery time from Active OFF state back to ON state is around 3 seconds.

EN-8