Digi 90000566_H manual Set network, Network level, Setting user permissions for commands, Where

	set network
set network
Devices	This command is supported in all Digi Connect products.
supported
Purpose	Used to set general network configuration options and display current
	network configuration options, including options for IP address settings,
	TCP keep-alives, retransmissions of TCP packets, and ARP settings.
	The “garp” and “rto_min.” options can be used for optimizing for latency at
	the network level.
Required	For Digi Connect products with two or more users, permissions must be set
permissions	to “set permissions s-network=read” to display network configuration
	attributes, and “set permissions s-network=rw” to display and set network
	configuration attributes. See "set permissions" on page 157 for details on
	setting user permissions for commands.
Syntax	Set network configuration options
	syntax: set network [ip address options]
	[TCP keepalive options]
	[TCP retransmit options]
	[ARP options]
	Where:
	[ip address options]:
	[ip=device ip address]
	[submask=subnet mask]
	[gateway=gateway ip address]
	[static={onoff}]
	[dhcp={onoff}]
	[autoip=(onoff)
	[dns1=primary dns server ip address]
	[dns2=secondary dns server ip address]
	[TCP keepalive options]:
	[idle=10-86400] (seconds)
	[probe_count=5-30]
	[probe_interval=10-75] (seconds)
	[TCP retransmit options]:
	[rto_min=30-1000] (milliseconds)
	[rto_max=1-240] (seconds)
	[ARP options]:
	[arp_ttl=1-20] (minutes)
	[garp=30-3600] (seconds)
	Display current network configuration options
	set network

Chapter 2 Command Descriptions 149