Digi 90000566_H manual Connectware=passterminate, Surelink=passterminate, Ping=passterminate

set passthrough

connectware={passterminate}

Specifies whether the Connectware Manager application is configured to pass to the connected device (“pass”) or terminate at the Digi Cellular Family device for purposes of managing it, known as a pinhole (“terminate”). The default is "terminate."

surelink={passterminate}

	Specifies whether the SureLink application is configured to pass to the
	connected device (“pass”) or terminate at the Digi Cellular Family device
	for purposes of managing it, known as a pinhole (“terminate”). The default
	is "terminate."
	ping={passterminate}
	Specifies whether ICMP echo (ping) requests pass to the connected
	device (“pass”) or terminate at the Digi Cellular Family device
	(“terminate”). The default is “pass.”
See also	• "revert" on page 61.
	• "show" on page 249.
	• The Digi Cellular Family User’s Guide’s section on IP Pass-through
	settings.
	• For descriptions of network services and their default network port
	numbers, see "set service" on page 191.
	• For descriptions of the Connectware Manager application and related
	settings, see "set mgmtconnection" on page 137, "set mgmtglobal" on
	page 140, and "set mgmtnetwork" on page 143.

156 Chapter 2 Command Descriptions