Digi 90000566_H manual Set python, Options Range=1, Command=filename

	set python
set python
Devices	This command is supported in ConnectPort X products only.
supported
Purpose	Configures Python programs to execute when the Digi device boots.
Syntax	set python [range=1–4]
	state={onoff}
	command=filename
Options	range=1 – 4
	The index or indices to view or modify with the command.
	state={onoff}
	When the state is set to on, the command specified will be run when the
	device boots.
	command=filename
	The program filename to execute, including any arguments to pass with
	the program, similar to the arguments for the "python" command. While
	this option allows for programs to be run from a TFTP server, this use is
	not recommended. If there are spaces to provide arguments, make sure
	to wrap the entire command in quotation marks.
See also	• "python" on page 58
	• The Digi Python Programming Guide.

Chapter 2 Command Descriptions 183