Q-Logic 2-8C manual Options, Port, Settings, Following is an example of the Show Log Level command

B – Command Line Interface	0
Show Log Command

Critical

Monitors critical events.

Warn

Monitors warning events.

Info

Monitors informational events.

None

Monitors none of the severity levels.

options

Displays the options used to set the component and severity level attributes.

port

Displays the ports being monitored for events. If an event occurs which is of the defined level and on a defined component, but not on a defined port, no entry is made in the log.

settings

Displays the current settings for component, level and port. This command is equivalent to executing the following commands separately: Show Log Component, Show Log Level, and Show Log Port.

Examples The following is an example of the Show Log Component command:

SANbox2 #> show log component

Current setting(s) for log component: NameServer

The following is an example of the Show Log Level command:

SANbox2 #> show log level

Current settings for log

------------------------

level Critical

B-74 59042-06 A