Q-Logic 2-8C manual Show Command, Keywords about, Alarm option, Broadcast

0	B – Command Line Interface
	Show Command

Show Command

Displays fabric, switch, and port operational information.

Authority None

Syntax show about alarm [option] broadcast chassis config [option] domains donor fabric

fdmi [port_wwn] interface

log [option] lsdb

mem [count] ns [option] pagebreak perf [option]

port [port_number] post log

setup [option] steering [domain_id] support

switch topology users version

Keywords about

Displays an introductory set of information about operational attributes of the switch. This keyword is equivalent to the Version keyword.

alarm [option]

Displays the alarm log and session display setting. If you omit [option], the command displays the last 200 alarm entries. The alarm log is cleared when the switch is reset or power cycled. [option] has the following value:

setting

Displays the status of the parameter that controls the display of alarms in the session output stream. This parameter is set using the Set Alarm command.

broadcast

Displays the broadcast tree information and all ports that are currently transmitting and receiving broadcast frames.

59042-06 A B-55