Q-Logic 2-8C manual Following is an example of the Set Config Switch command

0	B – Command Line Interface
	Set Config Command

The following is an example of the Set Config Switch command:

SANbox2 #> admin start
SANbox2 (admin) #> config edit
SANbox2 (admin-config) #> set			config	switch
A list of attributes with formatting and default values will follow.
Enter a new value or simply			press the ENTER key to accept the			current	value.
If you wish to terminate		this process before reaching the end				of the list
press 'q' or 'Q' and the		ENTER key		to do so.
AdminState	(1=Online, 2=Offline, 3=Diagnostics) [Online						]
BroadcastEnable	(True	/ False)			[False		]
InbandEnabled	(True	/ False)			[False		]
FDMIEnabled	(True	/ False)			[True		]
FDMIEntries	(decimal		value,	0-1000)	[1000		]
DefaultDomainID	(decimal		value,	1-239)	[11		]
DomainIDLock	(True	/ False)			[True		]
SymbolicName	(string,		max=32	chars)	[SANbox2		]
R_A_TOV	(decimal		value,	100-100000 msec)	[10000		]
E_D_TOV	(decimal		value,	10-20000 msec)	[2000		]
PrincipalPriority	(decimal		value,	1-255)	[254		]
ConfigDescription	(string,		max=32	chars)	[SANbox2-8c FC Switch]
FC-SW-2 Compliant	(True	/ False)			[True		]

The following is an example of the Set Config Threshold command:

SANbox2 #> admin start

SANbox2 (admin) #> config edit

SANbox2 (admin-config) #> set config threshold

A list of attributes with formatting and current values will follow.

Enter a new value or simply press the ENTER key to accept the current value.

If you wish to terminate this process before reaching the end of the list

press 'q' or 'Q' and the ENTER	key to do so.
ThresholdMonitoringEnabled	(True / False)	[False	]
CRCErrorsMonitoringEnabled	(True / False)	[True	]
RisingTrigger	(decimal value, 1-1000)	[25	]
FallingTrigger	(decimal value, 0-1000)	[1	]
SampleWindow	(decimal value, 1-1000 sec) [10		]
DecodeErrorsMonitoringEnabled	(True / False)	[True	]

59042-06 A B-41