Q-Logic 2-8C manual Following is an example of the User Add command

0		B – Command Line Interface
		User Command
Notes
	„ User accounts are enforced in SANsurfer Switch Manager only if the
	UserAuthentication parameter is set to True. The UserAuthentication default
	value is False. Refer to System keyword of the ”Set Setup Command” on
	page B-49for information about setting the UserAuthentication parameter.
	„ Authority level or password changes that you make to an account that is
	currently logged in do not take effect until that account logs in again.
Examples The following is an example of the User Accounts command:
	SANbox2 (admin) #> user accounts

Current list of user accounts
-----------------------------
images	(admin authority	= False,	never expires)
admin	(admin authority	= True ,	never expires)
chuckca	(admin authority	= False,	expires in < 50 days)
gregj	(admin authority	= True ,	expires in < 100 days)
fred	(admin authority	= True ,	never expires)

The following is an example of the User Add command:

SANbox2 (admin) #> user add

Press 'q' and the ENTER key to abort this command.

account name (1-15 chars)				: user1
account password (4-20			chars)	: *******
please	confirm	account	password: *******
set account expiration			in days	(0-2000, 0=never): [0] 100
should	this account have admin			authority? (y/n): [n] y
OK to add user		account	'user1'	with admin authority
and to	expire in 100 days?
Please	confirm	(y/n): [n] y

59042-06 A B-87